详情
特点
- 首款16位双通道ADC和PGA数据采集ASSP，实现零偏置，可用作灵活的传感器接口；偏置<1 LSB；噪声在1kHz，1 σ下<1 LSB
优势
- 具有最高准确度的双通道ADC，用于高达4kHz的信号调理；器件采用灵活的设计概念，可快速上市，应用于不断发展的电池管理领域；完全符合AEC-Q100标准
产品参数
分辨率
16
bit
Automotive qualified
AEC-Q100
Current consumption
典型值
3
mA
Standby current
40 µA
封装
SSOP20
工作环境温度
最小值
-40
°C
最大值
125
°C
封装尺寸
l
典型值
7.2
mm
w
典型值
7.8
mm
h
典型值
2
mm
电源电压
最小值
3.3
V
Function
current sensing
订单代码
下载
产品规格书
Datasheet
技术文档
Factsheet
环境文档
Material declaration form
Material declaration form
Material declaration form
Material declaration form
RoHS certificate
图片
Block diagram
软件
Evaluation software
Evaluation software
相关评估板、套件和附件
ams AS8510_DEM_RB_COPPERSHUNT Demonstrator board
This Copper-Shunt based current sensor demo utilizes the AS8510 for current measurement and thermal-coefficient compensation. It is intended for a current range of ~40A operation and 60A maximum. Two measurement paths are provided. The left one uses the AS8510’s internal temperature sensor and the right one uses a fine copper meander trace to sense temperature.
ams AS8510_DEM_SN Demonstrator kit
The AS8510 Demo Kit for AS8510 data acquisition front-end IC allows easy evaluation of the AS8510 features. Its USB connector allows easy access to all the chips features via a user friendly graphical PC interface. The GUI is supplied with the evaluation board and can be used to plot measured data as well as to access all the device registers and evaluate special settings.
Key Features:
- User friendly graphical PC interface
- Easy implemenation in your own software (for example to do lab measurements in Labview) possible
ams AS8510_REF_RB_ARDUINOSHIELD Reference design board
The AS8510 Arduino Shield Reference Design is an add-on to the very popular Arduino Series of µC development boards. The reference design allows to measure current and voltage via the AS8510 A/D IC and to use the measured data in any Arduino sketch. Schematic and layout are available as download with no restrictions. Libraries to interface to the Arduino IDE as well as example code can be downloaded for easy setup of this board.
For use of this AS8510 Arduino reference design an Arduino Uno (or similar) host board is required: http://arduino.cc/en/Main/ArduinoBoardUno
ams USB-BOARD_DEM_AC Demonstrator accessory
The USB Interface Board enables communication between the Copper-Shunt Demo and PC.
The kit consists of the dual layer PCB USB Interface Board and a HDMI Type-D to Type-C Cable which is used to connect demo board.
产品查询
寻找合适的产品
更多 电池传感器
艾迈斯欧司朗的电池温度传感器技术，为电动汽车拥有高性能的新能源车用电池监测/电源管理解决方案。