|
ams TMF8829 48x32 multi-zone Time-of-Flight sensor
|
The TMF8829 is a direct time-of-flight (dToF) sensor with configurable resolution of 8x8, 16x16, 32x32 & 48x32. The device is based on SPAD, TDC, and histogram technology and achieves a detection range of up to 11000 mm with an 80° field of view. <br><br>All processing of the raw data is performed on-chip, and the TMF8829 provides distance information along with confidence values, signal amplitude, and ambient light on its interface. Internally, the TMF8829 uses dToF histograms and peak detection, and therefore, it is highly tolerant to smudges on the cover glass. Additionally, the TMF8829 can handle multiple objects per depth point simultaneously without degrading accuracy. It reports the distance of all depth points with a resolution of 0.25 mm. <br><br>The device uses an I3C (I²C compatible) communication interface and a fully featured SPI interface for control and raw data streaming. A VBUS supply pin allows operation of the I²C/I3C or SPI with 1.2V, 1.8V, or 3V I/O supplies. Raw data streaming, including all algorithm peak detection results, allows further processing on the host for “AI-enabled” applications. <br><br>The TMF8829 is a fully contained optical module measuring only 5.7 mm x 2.9 mm x 1.5 mm.
<br><br><h3>
Watch the TMF8829 product overview video to discover more
<a href="https://youtu.be/7p9V5V-lP0U"> TMF8829 Overview Video</a></h3>
|
Sensor solutions
|
Direct Time-of-Flight Sensors (dToF)
|
|
ams TCS3410 Color and Flicker Detection Sensor
|
The TCS3410 features ambient light sensing, as well as flicker detection. The device comes in a low-profile and small footprint, L2.0mm x W1.0mm x H0.5mm optical QFN package. The Ambient Light Sensing function provides three concurrent ambient light and flicker sensing channels, which can be arbitrarily connected to the photodiodes via a programmable multiplexer. TCS3410 incorporates a set of RGB photodiodes and a Clear photodiode. The RGB and Clear photodiode area is covered with a UV/IR blocking filter. This architecture accurately measures ambient light and enables the calculation of irradiance of different light sources. Calculation results help to improve display appearance and picture taking. The device also integrates direct detection of ambient light flicker. Flicker detection is executed in parallel with ambient light sensing and has independent gain configuration. The flicker detection engine will sample and buffer data for calculating flicker frequencies externally on a host CPU.
|
Sensor solutions
|
Ambient light, Color, Spectral & Proximity Sensors
|
|
ams TCS3530 True Color Sensor with Flicker Detection
|
TCS3530 is an ultra-sensitive color sensor that matches the response of the human eye to visible light. The sensor’s highly accurate measurements of chromaticity and illuminance support superior automatic white balancing in cameras, as well as sophisticated display color management. Fully integrated optical assembly with built-in diffuser backed by end-of-line calibration simplifies manufacturers’ production processes and optical designs.
|
Sensor solutions
|
Ambient light, Color, Spectral & Proximity Sensors
|
|
ams TMF8701 1D Time-of-Flight Sensor
|
The TMF8701 is a true direct time-of-flight (ToF) sensor system in a single modular package which offers highly accurate depth accuracy detection through a sub-nanosecond light pulse and an antialiasing “stop-watch” method to measure round-trip time of pulse. It provides single zone detection of an object irrespective of the color, reflectivity and texture of the object.<br/><br/>The single module with VCSEL emitter offers high dynamic range and operates in either a proximity mode (0 – 10 cm) or a ranging mode (10 – 60 cm) for detection sensing. The device utilizes highly sensitive SPAD detection with fast compact time-to digital converters to make high accurate distance measurement within ±5% and is capable of operation in dark environments.<br/><br/> A built-in histogram is featured to detect cover glass and objects behind glass to select object with highest SNR while compensating for dirt and smudges on cover glass to produce artifact free measurement of multiple objects. The histogram enables greater distance between cover glass, delivers dynamic cover glass calibration and crosstalk compensation. Class 1 eye safety is also featured through the narrow sub-nanosecond (<500 ps) fast pulse 940 nm VCSEL driver. Background light noise is minimized through on-chip superior sunlight rejection filter. Data output is through a 1.8V I²C fast-mode communications interface and an integrated micro controller is featured with all algorithms included on-chip with no need for external optics. <br> <br/><br/><a href="https://ams-osram.com/news/press-releases/ams-tmf8701-true-direct-time-of-flight-tof-sensor-wins-best-of-sensors-innovation-and-the-company-scores-best-engineering-team-at-sensors-expo-2019" target="">The TMF8701 wins the Innovative Product of the Year Award at Sensors Expo 2019</a>
|
Sensor solutions
|
Direct Time-of-Flight Sensors (dToF)
|
|
ams TMF8801 1D Time-of-Flight Sensor
|
The TMF8801 is a true direct time-of-flight (ToF) sensor system in a single modular package which offers highly accurate depth accuracy detection through a sub-nanosecond light pulse and an antialiasing “stop-watch” method to measure round-trip time of pulse. It provides single zone detection of an object irrespective of the color, reflectivity and texture of the object. The single module with VCSEL emitter offers high dynamic range and detection sensing measurements from 2 – 250 cm distances. The device utilizes highly sensitive SPAD detection with fast compact time-to digital converters to make highly accurate distance measurements within ±5% and is capable of operation in dark environments and in the presence of sunlight. A built-in histogram is featured to detect cover glass and reports an object distances operating with the highest SNR while compensating for dirt and smudges contaminants on a products cover glass to produce artifact free measurement. The histogram delivers dynamic cover glass calibration and crosstalk compensation and background light noise is minimized through on-chip sunlight rejection filters. Data output is through a 1.8V I²C fast-mode communications interface and an integrated micro controller is featured with all algorithms included on-chip with no need for external optics.
|
Sensor solutions
|
Direct Time-of-Flight Sensors (dToF)
|
|
ams TMF8805 1D Time-of-Flight Sensor
|
The TMF8805 is a time-of-flight (TOF) sensor in a single modular package with associated VCSEL. The TOF device is based on SPAD, TDC and histogram technology. The device achieves 2500mm detection range.
|
Sensor solutions
|
Direct Time-of-Flight Sensors (dToF)
|
|
ams TMF8806 1D Time-of-Flight Sensor
|
The TMF8806 is a time-of-flight (TOF) sensor in a single modular package with associated VCSEL. The TOF device is based on SPAD, TDC and histogram technology. The device achieves 500cm detection range which may be extended to 1000cm with a small firmware download.
|
Sensor solutions
|
Direct Time-of-Flight Sensors (dToF)
|
|
ams TMF8820 3x3 multi-zone Time-of-Flight Sensor
|
The TMF8820 is a direct time-of-flight (dToF) sensor in a single modular package with associated VCSEL. The dToF device is based on SPAD, TDC and histogram technology and achieves 5000 mm detection range. Due to its lens on the SPAD, it supports 3x3 multizone output data and a wide, dynamically adjustable, field of view. A multi-lens-array (MLA) inside the package above the VCSEL widens up the FoI (field of illumination). All processing of the raw data is performed on-chip and the TMF8820 provides distance information together with confidence values on its I2C interface.
|
Sensor solutions
|
Direct Time-of-Flight Sensors (dToF)
|
|
ams TMF8821 configurable 4x4 multi-zone Time-of-Flight Sensor
|
The TMF8821 is a direct time-of-flight (dToF) sensor in a single modular package with associated VCSEL. The dToF device is based on SPAD, TDC and histogram technology and achieves 5000 mm detection range. Due to its lens on the SPAD, it supports 3x3, 4x4 and 3x6 multizone output data and a wide, dynamically adjustable, field of view. A multi-lens-array (MLA) inside the package above the VCSEL widens up the FoI (field of illumination). All processing of the raw data is performed on-chip and the TMF8821 provides distance information together with confidence values on its I2C interface.
|
Sensor solutions
|
Direct Time-of-Flight Sensors (dToF)
|
|
ams TMF8828 configurable 8x8 multi-zone Time-of-Flight Sensor
|
The TMF8828 is a direct time-of-flight (dToF) sensor in a single modular package with associated VCSEL. The dToF device is based on SPAD, TDC and histogram technology and achieves 5000 mm detection range. Due to its lens on the SPAD, it supports 3x3, 4x4, 3x6 and 8x8 multizone output data and a wide, dynamically adjustable, field of view. A multi-lens-array (MLA) inside the package above the VCSEL widens up the FoI (field of illumination). All processing of the raw data is performed on-chip and the TMF8828 provides distance information together with confidence values on its I2C interface.
|
Sensor solutions
|
Direct Time-of-Flight Sensors (dToF)
|
|
ams TSL2521 - Ambient Light Sensor with Flicker Detection
|
The TSL2521 features ambient light sensing, as well as flicker detection. The device comes in a low-profile and small footprint, L2.0mm x W1.0mm x H0.5mm optical QFN package. The Ambient Light Sensing function provides two concurrent ambient light sensing channels, which can be arbitrarily connected to the photodiodes via a programmable multiplexer. TSL2521 incorporates a set of Infrared photodiodes and a set of clear photodiodes. The clear photodiode area is covered with a UV/IR blocking filter. This architecture accurately measures ambient light and enables the calculation of irradiance of different light sources. Calculation results help to improve display appearance and picture taking. The device also integrates direct detection of ambient light flicker. Flicker detection is executed in parallel with ambient light sensing and has independent gain configuration. The flicker detection engine will sample and buffer data for calculating flicker frequencies externally on a host CPU.
|
Sensor solutions
|
Ambient light, Color, Spectral & Proximity Sensors
|
|
ams TSL2585 light sensor with UVA detection
|
<div>TSL2585 is a mini size ambient light sensor with UVA and light flicker detection, comes in a very low-profile and small footprint L2.0mm x W1.0mm x H0.35mm 6-pin OLGA package, perfectly fits wearable and mobile phone applications which are usually very space and height constrained.</div><div>The high sensitivity enables the device to work behind a low transmissivity covering glass providing an accurate ALS detection. In addition, TSL2585 has a special edge-located photodiode placement which allows for a narrow bezel design down to 0.4mm width when the device is placed very close to the product edge. Fulfilling requirements of today's industrial design of designing bezel-less products for a good looking appearance.</div>
|
Sensor solutions
|
Ambient light, Color, Spectral & Proximity Sensors
|
|
ams TCS3707 Color and Proximity Sensor
|
The TCS3707 is a very-high sensitivity light-to-digital converter that features ambient light and color (RGB) sensing, proximity and flicker detection. The Ambient light and color sensing function provide five rrent ambient light sensing channels: Red, Green, Blue, Clear, and Wideband. The RGB and Clear channels have a UV/IR blocking filter. This architecture accurately measures ambient light and enables the calculation of illuminance, chromaticity, and color temperature to manage display appearance. The proximity function synchronizes IR emission and detection to sense nearby objects. The IR driver needs to be connected to an external LED or VCSEL emitter. The architecture of the engine features self-maximizing dynamic range, ambient light subtraction, advanced optical crosstalk noise cancellation, data output and interrupt-driven 1.8V I²C communications interface. Sensitivity, power consumption, and noise can be optimized with adjustable IR LED timing and power. The device integrates direct detection of 50Hz or 60Hz ambient light flicker. Flicker detection is executed in parallel with ambient light and color sensing and has independent gain configuration. The flicker detection engine can also buffer data for calculating other flicker frequencies externally.
|
Sensor solutions
|
Ambient light, Color, Spectral & Proximity Sensors
|
