ams AS5116 正弦/余弦输出的位置传感器

The SD4Y Programmer is an in-system programming tool which is applicable for production environment. The SD4Y programmer supports: digital writing and reading; OTP programming and analog read back for the OTP verification. Additional the SD4Y programmer can use the AMS programming boards. The GUI and the Labview source code are available. Additional code samples for C; C++ and C# are available. Download latest software (UProg_SW_package_2v0.zip, 264MB)

The USB Interface & Programmer Box is an universal evaluation tool for magnetic position sensors with I2C or SPI interface. It comes with a 10-way cable to connect to a supported product on an existing board. The I2C or SPI wires are used for the communication (3.3V mode) and additionally the sensor can be powered from the USB I&P Box. By using the USB I&P Box Software, it is possible to read out the sensor data, write a configuration and to permanently program a configuration. Hardware and Software requirements: PC with Windows 7 or later and a USB-A port

The AS5116-SO_EK_SB socket board is used for quick programming of the AS5116 magnetic rotary position sensors without soldering due to its ZIF socket. This board is used in combination with the USB I&P Box or the SD4Y production programmer. The PCB offers 2 connecting options: The 5-pin dual-row connector on the left side for connecting to the USB I&P Box and the 10-pin dual-row connector on the right side for connecting to the SD4Y Production Programmer. Furthermore, 8-pin header on top gives access to analog signals and GND signals. A ZIF Open-Top-Socket for SOIC8 packages is mounted in the middle. Pin 1 of the IC is indicated by a small dot on the left bottom corner of the socket or by the label on the PCB. All passive components needed for proper operation are included on the PCB. Only a power supply mode of 5 V is possible.

The AS5116 Adapter Board is a small PCB allowing simple and quick testing or evaluation of the AS5116 magnetic position sensor without the need to build a test fixture or design an own PCB. The PCB can be connected either to an external microcontroller or to the USB I&P Box.The connector, 2x5 pin header (not populated), is included to this kit and is required for power supply as well as UART and analog interface.

The AS5116 Evaluation Kit allows an easy-to-use evaluation on AS5116. The evaluation kit includes the I&PBox (including USB-Stick and cables), AS5116 Adapter Board (including magnet sample), Socket Board, Magnet Holder and 5 AS5516 samples.