ams SD4Y-PROGRAMMER_EVM_AC Evaluation accessory

"The AS5270 Adapter Board allows you an easy-to-use evaluation of the basic function of the AS5270 magnetic position sensor in your own system design. This small factor board includes the position sensor with its necessary external components. All relevant signals are available on a 2.54mm header footprint and can be easily wired to your own application."

The AS5147 Adapter Board allows you an easy-to-use evaluation of the principle function of the AS5147 magnetic position sensor in your own system design. This small factor board includes the position sensor with its necessary external components. All relevant signals are available on a 2.54mm header footprint and can be easily wired to your own application.

The adapter board allows an easy and fast evaluation of the AS5147P rotary magnetic position sensor in the lab or together with an existing system. This small board is fully assembled with the AS5147P position sensor and its necessary external components. All relevant signals are available on a dual-row 2.54mm 4-pin header footprint and can be easily wired to an existing application.

The AS5040-PB programming board is used for quick programming the AS5040, AS5045, AS5140 and AS5145 magnetic rotary position sensors without soldering due to its ZIF socket. This board must be used in combination with the SD4Y-Programmer, which provides the chip with the adequate OTP programming commands.

The AS5045-AB Adapter Board allows you an easy-to-use evaluation of the principle function of the AS5045 magnetic position sensor in your own system design. This small factor board includes the position sensor with its necessary external components. All relevant signals are available on a 2.54mm header footprint and can be easily wired to your own application.

The AS5161-EK-AB Adapter Board allows you an easy-to-use evaluation of the principle function of the AS5161 magnetic angle position sensor in your own system design. This small factor board includes the sensor with its necessary external components. All relevant signals are available on a 2.54mm header footprint and can be easily wired to your own application.

The AS5045B-DK-AB Adapter Board allows you an easy-to-use evaluation of the principle function of the AS5045B rotary magnetic position sensor in your own system design. This small factor board includes the position sensor with its necessary external components. All relevant signals are available on a 2.54mm header footprint and can be easily wired to your own application.

The AS5162 Adapter Board allows you an easy-to-use evaluation of the principle function of the AS5162 magnetic angle position sensor in your own system design. This small factor board includes the sensor with its necessary external components. All relevant signals are available on a 2.54mm header footprint and can be easily wired to your own application.

The AS5x47-TS-EK-SB Socket Board is used for quick programming the AS5047D and AS5147 magnetic rotary position sensors without soldering due to its ZIF socket. This board can be used in combination with the USB I&P Box or the SD4Y production programmer.

The adapter board of AS5200L allows you to evaluate the AS5200L, one of our automotive qualified dual die sensors, with all its features. The adapterboard consists of the AS5200L position sensor and its necessary external components. All relevant signals are available on a dual-row 2.54mm 4-pin header footprint and can be easily wired to an existing application. To read out the sensor over I2C connect the sensor to a standard microcontroller.

The AS5215 Adapter Board allows you an easy-to-use evaluation of the principle function of the AS5215 magnetic position sensor in your own system design. This small factor board includes the position sensor with its necessary external components. All relevant signals are available on a 2.54mm header footprint and can be easily wired to your own application.

The AS5x47D Evaluation Kit allows you an easy-to-use evaluation on all sensors of the AS5x47D family. This evaluation kit includes the USB I&P programmer, the evaluation software for the AS5x47D sensor familiy and 2 different adapter boards (AS5147 and AS5047D). In addition a magnet and magnet holder is provided.

The AS5070-SO_EK_SB socket board is used for quick programming of the AS5070A and AS5070B magnetic rotary position sensors without soldering due to its ZIF socket. This board can be used in combination with the AS5xxx-EK-USB-PB UART Programming Board and the provided LabVIEW evaluation software.The PCB offers direct connecting option to the AS5xxx-EK-USB-PB UART Programmer with the 4-pin single-row connector on the left side. A ZIF Open-Top-Socket for SOIC8 packages is mounted in the middle. Pin 1 of the IC is indicated by a small white dot on the PCB. All passive components needed for proper operation are included on bottom side the PCB.

The AS5070 adapter board is a small PCB allowing simple and quick testing or evaluation of the AS5070 magnetic position sensor without the need to design and manufacture an own PCB.The PCB can be connected to an external microcontroller or to the AS5xxx-EK-USB-PB UART Programmer which can be used in combination with the AS5070 Software GUI provided by ams-OSRAM AG.JP1 is populated with a 1x4 female pin header it is required for the power supply (VCC and GND) and output (OUT). This connector directly fits to the UART Programmer.All necessary external components C1 (VDD3V3-GND) and C2 (VDD-GND) are already populated to the PCB.

The AS5115-AB Adapter Board allows you an easy-to-use evaluation of the principle function of the AS5115 magnetic position sensor in your own system design. This small factor board includes the position sensor with its necessary external components. All relevant signals are available on a 2.54mm header footprint and can be easily wired to your own application.

The AS5600L adapter board is a small PCB allowing simple and quick testing or evaluation of the AS5600L magnetic position sensor without the need to build a test fixture or design an own PCB.

The AS5115-PB programming board is used for quick programming the AS5115 automotive position sensor without soldering due to its ZIF socket. This board must be used in combination with the SD4Y-Programmer, which provides the chip with the adequate OTP programming commands.

The AS5116-SO_EK_SB socket board is used for quick programming of the AS5116 magnetic rotary position sensors without soldering due to its ZIF socket. This board is used in combination with the USB I&P Box or the SD4Y production programmer. The PCB offers 2 connecting options: The 5-pin dual-row connector on the left side for connecting to the USB I&P Box and the 10-pin dual-row connector on the right side for connecting to the SD4Y Production Programmer. Furthermore, 8-pin header on top gives access to analog signals and GND signals. A ZIF Open-Top-Socket for SOIC8 packages is mounted in the middle. Pin 1 of the IC is indicated by a small dot on the left bottom corner of the socket or by the label on the PCB. All passive components needed for proper operation are included on the PCB. Only a power supply mode of 5 V is possible.

The AS5116 Adapter Board is a small PCB allowing simple and quick testing or evaluation of the AS5116 magnetic position sensor without the need to build a test fixture or design an own PCB. The PCB can be connected either to an external microcontroller or to the USB I&P Box.The connector, 2x5 pin header (not populated), is included to this kit and is required for power supply as well as UART and analog interface.

The AS5132-AB Adapter Board allows you an easy-to-use evaluation of the principle function of the AS5132 magnetic position sensor in your own system design. This small factor board includes the position sensor with its necessary external components. All relevant signals are available on a 2.54mm header footprint and can be easily wired to your own application.

The AS5132-PB programming board is used for quick programming the AS5132 position sensor without soldering due to its ZIF socket. This board must be used in combination with the SD4Y-Programmer, which provides the chip with the adequate OTP programming commands.

The AS5134-AB Adapter Board allows you an easy-to-use evaluation of the principle function of the AS5134 magnetic position sensor in your own system design. This small factor board includes the position sensor with its necessary external components. All relevant signals are available on a 2.54mm header footprint and can be easily wired to your own application.

The AS5134-PB programming board is used for quick programming the AS5134 position sensor without soldering due to its ZIF socket. This board must be used in combination with the SD4Y-Programmer, which provides the chip with the adequate OTP programming commands.

The AS5140H Adapter Board allows you an easy-to-use evaluation of the principle function of the AS5140H magnetic position sensor in your own system design. This small factor board includes the position sensor with its necessary external components. All relevant signals are available on a 2.54mm header footprint and can be easily wired to your own application.

The adapter board allows an easy and fast evaluation of the AS5600 rotary magnetic position sensor in the lab or together with an existing system. This small factor board is fully assembled with AS5600 position sensor and its necessary external components. All relevant signals are available on a dual-row 2.54mm 4-pin header footprint and can be easily wired to an existing application.

The reference module AS5600-SO_RD_RB is a contactless potentiometer module which is produced by MEGATRON (www.megatron.de) and allows an easy and fast evaluation of the AS5600 rotary magnetic position sensor. With this module it is possible to replace an existing potentiometer solution. The module is fully assembled with the AS5600 position sensor and its necessary external components. All relevant signals are available on a 5-way connector and can be easily wired to an existing application. Additionally a 4-way DIP-switch allows you to change the settings of the AS5600.

The AS5116 Evaluation Kit allows an easy-to-use evaluation on AS5116. The evaluation kit includes the I&PBox (including USB-Stick and cables), AS5116 Adapter Board (including magnet sample), Socket Board, Magnet Holder and 5 AS5516 samples.

The adapter board allows an easy and fast evaluation of the AS5601 rotary magnetic position sensor in the lab or together with an existing system. This small factor board is fully assembled with AS5601 position sensor and its necessary external components. All relevant signals are available on a dual-row 2.54mm 4-pin header footprint and can be easily wired to an existing application.

The AS5601-SO_RD_ST is a contactless encoder and allows an easy and fast evaluation of the AS5600 in the lab. Additionally it is possible to replace an existing encoder with the reference design. The module is fully assembled with an PCB including the AS5601 position sensor and its necessary external components. All relevant signals are available on a 7-way connector and can be easily wired to an existing application.

The Reference Board is ideal for quick evaluation of AS5715R inductive position sensor. Fully assembled board, Target, Spacer and Connector (plug-strip) are included into Kit. The printed circuit coil is included into the pcb. The design of the coil and the target represent an example which it can be used in a 4-pole motor.

The AS5215-PB programming board is used for quick programming the AS5215 automotive position sensor without soldering due to its ZIF socket. This board must be used in combination with the SD4Y-Programmer, which provides the chip with the adequate OTP programming commands.

The AS5x47P Motor Board is a simple PCB which is designed to adapt to standard size BLDC or stepper motors. It allows easy and quick evaluation of the AS5x47 magnetic position sensor family. The sensor and external components (capacitors, etc.) are already soldered to the PCB.

The AS5245-PB programming board is used for quick programming the AS5245 position sensor without soldering due to its ZIF socket. This board must be used in combination with the SD4Y-Programmer, which provides the chip with the adequate OTP programming commands.

The AS5247-MF_EK_AB allows you an easy-to-use evaluation of the principle function of the AS5247 magnetic position sensor in your own system design. This small factor board includes the position sensor with its necessary external components. All relevant signals are available on a 2.54mm header footprint and can be easily wired to your own application.

The AS5047D Adapter Board allows you an easy-to-use evaluation of the principle function of the AS5047D magnetic position sensor in your own system design. This small factor board includes the position sensor with its necessary external components. All relevant signals are available on a 2.54mm header footprint and can be easily wired to your own application.

The AS5247-MF_EK_SB is used for quick programming the AS5247 magnetic rotary position sensors without soldering due to its ZIF socket. This board can be used in combination with the USB I&P Box or the SD4Y production programmer.

The AS5261-EK-AB Adapter Board allows you an easy-to-use evaluation of the principle function of the AS5261 magnetic angle position sensor in your own system design. This small factor board includes the sensor with its necessary external components. All relevant signals are available on a 2.54mm header footprint and can be easily wired to your own application.

The AS5262-EK-AB Adapter Board allows you an easy-to-use evaluation of the principle function of the AS5262 magnetic angle position sensor in your own system design. This small factor board includes the sensor with its necessary external components. All relevant signals are available on a 2.54mm header footprint and can be easily wired to your own application.

The adapter board allows an easy and fast evaluation of the AS5047P rotary magnetic position sensor in the lab or together with an existing system. This small board is fully assembled with the AS5047P position sensor and its necessary external components. All relevant signals are available on a dual-row 2.54mm 4-pin header footprint and can be easily wired to an existing application.