ams AS5147 Rotary Sensor

The AS5x47-TS-EK-SB Socket Board is used for quick programming the AS5047D and AS5147 magnetic rotary position sensors without soldering due to its ZIF socket. This board can be used in combination with the USB I&P Box or the SD4Y production programmer.

The AS5x47D Evaluation Kit allows you an easy-to-use evaluation on all sensors of the AS5x47D family. This evaluation kit includes the USB I&P programmer, the evaluation software for the AS5x47D sensor familiy and 2 different adapter boards (AS5147 and AS5047D). In addition a magnet and magnet holder is provided.

The AS5x47P Motor Board is a simple PCB which is designed to adapt to standard size BLDC or stepper motors. It allows easy and quick evaluation of the AS5x47 magnetic position sensor family. The sensor and external components (capacitors, etc.) are already soldered to the PCB.

The USB Interface & Programmer Box is an universal evaluation tool for magnetic position sensors with I2C or SPI interface. It comes with a 10-way cable to connect to a supported product on an existing board. The I2C or SPI wires are used for the communication (3.3V mode) and additionally the sensor can be powered from the USB I&P Box. By using the USB I&P Box Software, it is possible to read out the sensor data, write a configuration and to permanently program a configuration. Hardware and Software requirements: PC with Windows 7 or later and a USB-A port

The AS5147 Adapter Board allows you an easy-to-use evaluation of the principle function of the AS5147 magnetic position sensor in your own system design. This small factor board includes the position sensor with its necessary external components. All relevant signals are available on a 2.54mm header footprint and can be easily wired to your own application.