艾迈斯 AS5247 双模(die)位置传感器

The SD4Y Programmer is an in-system programming tool which is applicable for production environment. The SD4Y programmer supports: digital writing and reading; OTP programming and analog read back for the OTP verification. Additional the SD4Y programmer can use the AMS programming boards. The GUI and the Labview source code are available. Additional code samples for C; C++ and C# are available. Download latest software (UProg_SW_package_2v0.zip, 264MB)

This Rotary Magnetic Holder (RMH) is designed to use it on our magnetic rotary position sensor adapter boards for easy evaluation. It allows fast prototyping and quick measurements during development. For more details please download the document.

The USB Interface & Programmer Box is an universal evaluation tool for magnetic position sensors with I2C or SPI interface. It comes with a 10-way cable to connect to a supported product on an existing board. The I2C or SPI wires are used for the communication (3.3V mode) and additionally the sensor can be powered from the USB I&P Box. By using the USB I&P Box Software, it is possible to read out the sensor data, write a configuration and to permanently program a configuration. Hardware and Software requirements: PC with Windows 7 or later and a USB-A port

The AS5247-MF_EK_AB allows you an easy-to-use evaluation of the principle function of the AS5247 magnetic position sensor in your own system design. This small factor board includes the position sensor with its necessary external components. All relevant signals are available on a 2.54mm header footprint and can be easily wired to your own application.

The AS5247-MF_EK_SB is used for quick programming the AS5247 magnetic rotary position sensors without soldering due to its ZIF socket. This board can be used in combination with the USB I&P Box or the SD4Y production programmer.