ams AS6221 Temperature Sensor

The USB Interface & Programmer Box is an universal evaluation tool for magnetic position sensors with I2C or SPI interface. It comes with a 10-way cable to connect to a supported product on an existing board. The I2C or SPI wires are used for the communication (3.3V mode) and additionally the sensor can be powered from the USB I&P Box. By using the USB I&P Box Software, it is possible to read out the sensor data, write a configuration and to permanently program a configuration. Hardware and Software requirements: PC with Windows 7 or later and a USB-A port

The AS6221 Eval Kit is a simple PCB to enable an easy evaluation of the ams temperature sensor. The board features an AS6221 digital temperature sensor, a decoupling capacitor and pull-up resistors. The included jumpers are an easy way of setting the eight I²C addresses of the sensor. A 5x1 pin header with a 2.54mm pitch offers all necessary interfaces to connect the adapterboard to your application processor.

The AS6221 demo kit offers an easy-to-use exploration of the ams digital temperature sensor. It is Bluetooth enabled to communicate with your device. By downloading the companion app from the App Store or Google Play Store it is possible to modify all settings of the sensor and observe the impact on power consumption and conversion rate. Up to three demos could be paired at the same time to help you find the optimal settings for your needs. It even enables you to record a temperature sequence to compare it with different settings of the temperature sensor. Finally, the app does provide the key information about the product and helps to understand the principals of the alert mode. The demo kit consists of an AS6221 temperature button and a CR2023 coin cell. By pulling the flap, the demo is enabled and ready to be paired with the app.Download the latest app here

The AS6221 Flex PCB Evaluation Kit enables easy integration of the digital temperature sensor AS6221 into any kind of application. Its very compact and flexible design offers maximum freedom. The very low thermal mass of the sensor + flex PCB carrier board allows fast reaction times on temperature changes. The kit also contains the I&P Box to connect the sensor board to a laptop or PC. With the software provided, temperature readout and sensor configuration are possible.